DeckLink I/O card installation
1. Turn the system OFF and physically remove the power cord from the power supply.
FAILURE TO REMOVE POWER CABLE COULD RESULT IN PHYSICAL DAMAGE TO THE SYSTEM AND OR COMPONENTS / I/O CARDS !!!
2. Place the DeckLink card in one of the available PCI-e slots
For systems using multiple cards made by the same manufacture such as “BlackMagic”, you will install
them all together. Running setup separately for each card is NOT necessary.
3. Turn the system ON.
Re: Blackmagic decklink card not detected jeromiec83223024 Nov 26, 2014 12:37 PM ( in response to Nicky Ferrari ) The list of available hardware is exposed to Flash by the OS and browser, so it’s probably a problem upstream from us. The Blackmagic DeckLink Capture source casts output from any compatible playback device (e.g. PC, Mac, smartphone, tablet, gaming console, etc.) on a display or a video wall. Follow the below mentioned steps under Userful Control Center.
4. Once the system returns to final desktop, navigate to Windows “Device Manager”.
Right click on My Computer > click Mange > click Device Manager
5. Confirm that the newly installed I/O card shows up. It will show up with a yellow exclamation mark ! In “Other Devices” as “Multimedia Video Controller”
Decklink Card Driver For Mac
6. Navigate to the DeckLink driver folder and double click the file to start the installation.
NOTE: Our default location is on the “D” drive then InstallDriversDrivers_Win7_64Broadcast_Card
The location of your drivers may or may not be the same if we did not build the system.
Decklink Driver Download
7. You will go through a series of screens where you will select the following at each screen.
A. On the first screen ‘Welcome to the Blackmagic Design Desktop Video Setup Wizard’ click NEXT
A firmware update may be required for the newly added card. Select Update now
B. At the ‘About Desktop Video Software’ screen click NEXT
Decklink Mini Recorder Driver Download
C. At the ‘End-user License Agreement’ screen place a check mark in selection “I accept the terms in the license Agreement” then select NEXT
D. At the ‘Ready to install Blackmagic Design Desktop Video’ screen select INSTALL
E. You will see the drivers begin to unpack and install, you will also notice on the lower right systems tray that the device is being recognized and installed by windows.
F. Click the FINISH button. This has successfully completed the installation of the I/O card.
8. You will be prompted to Reboot your server. Click YES to reboot.
9. When the system reboots as final confirmation you will check in Device Manager that it is listed and recognized properly under “Sound, video and game controllers”. You should see several instances of BlackMagic audio, and driver devices listed.
